Hydraulic curing press for PCR/TBR is high-precision, full-servo controlled tire curing press, to adapt the requirements of intelligent tire factories for high-precision control of tire curing process, such as tire loading, shaping, curing, tire unloading, inflation, cooling and inflation shaping.
Tire uniformity testing machine is suitable for fully automatic online detection of tire uniformity for all cars and light trucks with a diameter of 10"-25". Turning over or reversing the same tire and the consistency of measurement data between different machines reaches the international advanced level of similar products.
Tire uniformity rectifier is mainly used for the correction of the tires whose uniformity is not up to standard tested by Uniformity testing machine, in order to get the tire meet the qualified standards. Through the stretching, pressurization and regularheating on the tire bead, making the concentricity of the two bead rings get improved, and eliminating the stress concentration, thereby correcting the bead of the tire, reducing values of RFV and RFV1H and improving the tire quality. The machine can rectify tire without buffing and damaging to tire appearance.There is no indentations and any defects on the appearance of rectified tires.
Tire noise can be effectively reduced by evenly coating the inner wall of the laser-cleaned tire with glue and applying the silent sponge strip.
The inner liner of the finished tire is coated with a layer of polymer nanomaterial after laser cleaning, and the finished tire is self-sealed when being punctured.
Use laser to engrave the sidewall part of the finished tire. The machine is customizable for any font engraving, concave and convex characters, Word, CAD, LOGO or pattern and other files. The use of laser engraving technology can directly replace the fonts and patterns that should be printed on the sidewall through the mold with laser engraving on cured tire. This method maximizes the replacement frequency of mold labels(brand lable, production cycle number lable, etc..), and is more suitable for meeting the customized needs of tire factory and tire dealers or individual consumers, any pattern and text they want to engrave in the blank space on the sidewall is available.
Rubber track steel cord ply winding line is mainly used for the winding and building of track steel cord belts. Through servo control, the expansion and contraction of the winding drum chuck, the wire arrangement mechanism, the expansion and contraction chuck and the pressing device are precisely controlled to be wound into a steel wire belt.
Track shaping&curing press is mainly used for curing rubber track of agricultural vehicle, engineering vehicle,military vehicle,or snowmobile triangle rubber track, etc. The entire system realizes the ring-shaped jointless curing of the rubber track through two stages of curing process.
The DLF-BWL-SH3 production line is used for the winding and building of hexagonal or square cross-section beads. It is designed to fully automatically produce 3 beads (4-14 inches) with a single bead winding in each production cycle.
Qingdao Dlftech Technology Development Co., Ltd. All Rights Reserved. Powered by HiCheng SITEMAIP