Home ProductsTire Machines > New type textile ply slitting machine

New type textile ply slitting machine

It is used to cut wide fabric into narrow fabrics, put the narrow fabric roll on Plastic reel, preparing for bead wrapping.

1.High configuration: Pneumatic components chose FESTO, electric control adopts Mitsubishi and Schneider.

2.Uniform cutting : The fabric is separated to both sides by a fabric guide roller, and fabric don’t crease , which is convenient for uniform cutting.

3.Flat wind-up : Fabric strips are passively wind up.

1.Uniform let-off : Linear guide rail is arranged between the frame and the base of the let-off device. The lead screw of the edge tracker moves the rack and adjusts the center of the fabric.

2.Way of wind up : 70 sets of wind-up arms were divided into upper and lower (two layers of 35 each), passively winded up. The shaft is fitted with a plastic wheel, the driving shaft rotates to turn the plastic wheel, in order to put the strip roll onto the plastic wheel.

3.Let-off device: The drive motor and reducer are integrated, the reducer has sprockets at the front, power is transferred through the chain to the textile ply roll. The textile ply is supported by two safety clamps.

4.The way of slitting: The parting tool shaft is driven by a manual worm gear reducer. When fabric through parting tool , the rotary cylinder turns the parting tool to cut fabric and finish the fabric slitting.

The width of cord fabric
Max:1500mm
The diameter of cord fabric and liner
Φ1000mm
The diameter of liner
Φ750mm
Cutting speed
6~15m/min(Max:30m/min)
The quantity of parting tool
70pc
The width of cord fabric after cutting
Min:20mm
The width of cord fabric
Max:1450mm
Wind up square shaft size
38×38mm
Wind up diameter
Max:200mm
LEAVE A MESSAGE

+8618661868111

Home
Tel
Message
Contact